PLC Basic Applications ( PLC1) Course

If you would like to become a good Automation Engineer or Technician , you have to be familiar with PLC Programming & its  Applications.

As you know, PLC Programming is the Basic Level to step up to the PLC  Advanced Training  Level & its Applications ( Which is Industrial Applications )

So, once you get the PLC1 Training , you will be to go to the higher level of PLC.

Target Audience:

This program is targeting :

• Industrial, Commercial, Institutional
• Electrical Engineers Electrical Maintenance Tradespeople & Technicians
• Instrumentation And Control Engineers

Language: English/Arabic 

PLC Level 1 (Basic Programming) Course Content:

▪ Get to know PLC device manufacturers and the difference between PLC device and the
other control tools.
▪ Studying PLC device components and Expansion Unit And its types
▪ Practical Training on how to use the Ladder Diagram in programming PLC device.
▪ Practical Training on how to use storage spaces associated with Hardware for the input
and output point.
▪ Practical Training on how to program commands like – Negative Edge/Positive Edge/Reset/Set
▪ Practical Training on Implementation of the electric clipper machine project “ Electrical Cutter “
▪ Practical Training on how to empty the tank into the Container.
▪ Practical Training on how to use Level sensor in mixing and discharging liquids.
▪ Practical Training on how to use internal timers and counters inside PLC device.
▪ Practical Training on an elevator project with Internal Calls and External Calls
▪ Practical Training on how to Cancel the reverse movement of the motor with a large
capacity, except when a specific time has passed since the separation of the first side.
▪ Practical Training on the preparation of boiler fluid and use Flowmeter to empty the liquid.
▪ Practical Training on Implementation of a production line project multi-stage (filling, covering, etc)
▪ Practical Training on how to use programming commands like” Compare “And implement a
project to separate the motor after 48Hrs of work and restart it after maintenance or after
hours of rest.
▪ Practical Training on Making a soap bar filling line project using counters.
▪ Practical Training on a garage project using a common portal for entry, exit and
Manual/Automatic operation.
▪ Practical Training on how to Use Rotary Encoder and connect it with PLC And learn to use
the high-speed counter.
▪ Practical Training on a multifunctional production line project such as single/even/All
▪ Practical connections: PLC SIEMENS S7-200 & PLC SIEMENS S7-1200
▪ Programs used in this Training: MICROWIN/TIA/S7-200 Simulator

if you would like to get more information please register . .