SAP 2000 Civil Applications Course

Target Audience:

This program is targeting :

• Industrial, Commercial, Institutional
• Civil Engineering Graduates

Language: English/Arabic 

SAP 2000 Civil Applications Course Content:

Design beams (Steel & Concrete)

• How to draw (simple – continuous – Cantilever) Beams and how to make intermediate hinge.
• How to Assign loads (Distributed load – Triangle load – Trapezoidal load – Concentrated load – Concentrated moment – Distributed moment).
• How to Define Sections (Steel & Concrete)?
• Straining action output (Normal Force – Shear Force – Bending Moment – Torsion).
• Check Deflection (Short Term – Long Term). Design frames (Steel & Concrete)
• How to Define Sections (Steel & Concrete)?
• Straining action output (Normal Force – Shear Force – Bending Moment – Torsion).
• Check Deflection (Short Term – Long Term). Design trusses (Steel & Concrete)
• Make Structural system for concrete and steel truss.
• Diff. between Concrete and steel truss members.
• How to define (single angle & Double angle).
• Output Results (Axial Forces). Design solid slabs
• How to make Structural system from Arch plan.
• How to get Concrete Dimensions (Slabs & Beams).
• Wall Loads Calculations.
• Design Reinforcement for (Beams-Columns-Slabs). Design Flat Slabs
• How to make Structural system from Arch plan.
• How to get Concrete Dimensions (Slabs & Beams).
• Equivalent Wall Loads Calculations.
• Design Reinforcement for (Beams-Columns-Slab). Design paneled beams
• Choose Limitation for Paneled beams Length.
• How to determine paneled beams dimensions.
• Design Beams.
• Example (Paneled beams – Paneled Frames – Skew Paneled beams) Design raft foundation
• Foundations Types.
• How to Choose Foundation Type.
• Design Raft under Gravity load and Seismic loads.
• How to Import Raft from AutoCAD (Raft DXF File).
• Raft Reinforcement.
• Design Raft. Design of tanks
• Circular Tanks (Underground – Rested on Soil – Elevated).
• Rectangular Tanks (Underground – Rested on Soil – Elevated).
• Design Reinforcement. How to make DXF file to (SAP2000)
• Draw on AutoCAD DXF File.
• Import to SAP Programs.
• Define Sections.
• Define Loads.
• Assign Loads.
• Design Model. Seismic Lecture
• How to Calculate Seismic Forces by using (Time History, Response Spectrum, Equivalent static load) · How to Calculate Center of Rigidity.
• Check Story Drift.
• Seismic Combinations Equations.
• Seismic Design Techniques. Design High Rise Building and assign Seismic Loads on Structure on SAP Program How to design column
• How to Design (Axial, Uniaxial, Biaxial) Columns by using Charts.
• Check Braced and Unbraced Structures.
• Check Buckling. -Design shear walls Design Cores (Symmetric and Unsymmetrical) Calculate torsional moment due to lateral loads and get centers of mass & rigidity

if you would like to get more information please register . .